HYTRON by Primech AI · Nasdaq: PMEC

HYTRON

Commercial bathrooms, cleaned fixture by fixture.

HYTRON inspects, flushes, scrubs, rinses and dries toilets, urinals, sinks, countertops and mirrors, then docks itself to refill, drain and recharge.

89%

less staff time on the same bathroom, Temasek Polytechnic

Fully autonomous

no operator in the room

Up to 100 TOP

on-device AI, NVIDIA Jetson Orin NX

A Primech Holding company (Nasdaq: PMEC) · NVIDIA Inception Program member · TechRadar Pro Picks Award, CES 2026 · Supportable equipment under Singapore’s Environmental Services Productivity Solutions Grant

What HYTRON cleans

Toilets, Urinals, Sinks and Mirrors, Not Just the Floor

HYTRON works fixture by fixture with a six-axis arm and rotating brushes, adjusting contact pressure to the surface it is cleaning.

Restocking, waste removal, inspection and general floor care stay with your team.

How a cycle works

Inspect, Flush, Clean, Dry, Reset

Every fixture runs through the same sequence, with no operator in the room. The full toilet sequence is on the toilet cleaning robot page, and the robot itself on the HYTRON page.

A toilet takes about 6 to 10 minutes, depending on whether a Spot Clean or a Deep Clean is programmed for it, and urinals and wash basins about 3 minutes each.

  1. Scan and pre-flush. Computer vision and AI inspect the fixture first, so a blocked or full bowl is caught before any flush.
  2. Seat and lid. Sensors detect and lift the seat and lid, then close both at the end of the cycle.
  3. Water jetting. Electrolyzed water, generated on board, lifts soil without contact.
  4. Brushing. Rotating brushes scrub bowl, rim and surround, with force sensors setting the pressure.
  5. Optional product step. The facility’s approved detergent or disinfectant is applied from the 0.4 US gal (1.5 L) tank, with the dwell time its label sets.
  6. Rinse and post-flush. The fixture is rinsed and flushed again.
  7. Dry. An air blower and squeegee remove moisture from fixtures, counters, mirrors and the floor around them.
  8. Tool self-clean. Brushes, wipers and nozzles are cleaned with electrolyzed water inside the housing before the next fixture.
Proof

In Service in Singapore and Hong Kong

HYTRON is deployed with facility management operators in Singapore and Hong Kong, with customer trials underway in South Korea, Japan and the United States.

89%At Temasek Polytechnic, staff time on the same bathroom fell from about 45 minutes to about 5. In the same trial HYTRON cleaned 4 stalls, 3 urinals and 2 basins in about 45 minutes of unattended runtime.

3 yearsA three-year HYTRON lease at a high-traffic Singapore public-sector site, signed in May 2026.

12 monthsA 12-month pilot at Dunman High School, through the MOE and MDDI Innovation Challenge.

Specifications at a glance

HYTRON at a Glance

16.1 inwide (409 mm), sized for standard stalls

282 lboperating weight (128 kg)

6 axesrobot arm with force-controlled contact

100 TOPSon-device AI, NVIDIA Jetson Orin NX 16GB

2 scannerssafety laser scanners, plus a 3D LiDAR

Up to 4 hper charge, then it refills, drains and recharges at its dock

Next step

See HYTRON Clean a Real Bathroom

Book a demonstration at your site or ours, or ask about distribution in your territory.